Vertebrae Javelin-tofotfeste til Blaser
Et robust tofotfeste som ikke vil knekke eller bli bøyd. Vertebrae universalfeste til tofot gir brukeren mulighet til å bytte mellom Versa-Pod, Neopod, Javelin og Picatinny ved å bytte ut en komponent. Den er laget for å passe både tre- og syntetisk stokk.
The Vertebrae Bipod Mount for Blaser fits directly to a Blaser R93, R8 or Mauser M03 with synthetic stock and wood stocks where the front rifle sling mount is attached with a bolt and not a wood screw. It can be fitted to any other wood stock by using the Glue-in rod option.
The glue-in rod is a aluminium rod that can be epoxied into the stock, and the adapter mounted on the rod. The "step down interface" should rest lightly against the front of the stock when mounted. Use a drop of Loctite 222. The rod may also be used on Blaser synthetic stocks, if you need that extra bit of rigidity and strength.
To mount the UBM on a Blaser, unscrew the original Blaser swivel mount and fasten the “step down-interface” using a 5mm Allen head screw. Make sure you have the interface aligned vertically. Use the Hexagon flange nut on the inside of the stock. Tighten the assembly together; we suggest using Locktite 222 on the screw.
Changing the front part of the UBM from Versa-Pod to picatinny or to a NeoPod is done in seconds. Just unscrew the 6mm sunk head Allen bolt, replace the adapter and you’re done. We suggest using a drop of Loctite 222 and tightening the screw with the long end of the Allen key, using a two-finger torque grip. Do not overdo it. If you bend the Allen key you are over-torqueing it.