Works without infrastructure, internet connection or cell phone signal
Place the TrueZeroTarget sensor bar on a tripod or ground attachment. Aim it at the shooting position, insert the target face in the target holder, turn it on and connect your tablet, smartphone or PC via the built-in Wi-Fi.
That’s it! You are now ready to shoot and view bullet speed and hits displayed on the screen.
No wiring, target lifters, pit, internet or phone signal or any other infrastructure required. Perfect for the individual shooter or a club wanting to install an electronic sight-in target. The battery lasts for a whole day of shooting. Easily deployable as a personal target or sight-in target on an existing range with paper or electronic targets.
Use your own tablet or smartphone
The TrueZeroTarget’s built-in Wi-Fi connects with your tablet or smartphone just like the router back home. You don’t need internet or cell phone signal to connect with the target’s Wi-Fi.
Wi-Fi range with the supplied standard antenna is 2-400m line-of-sight for most tablets. Range can easily be extended to any distance by means of access points or low-cost high-gain antennas.
World class accuracy
Individual shot locations are accurate to 3mm at the center of the target. This is far better than you can aim with a scope with 1cm clicks at 100m. It far surpasses the requirements set by the International Sports Shooting Federation. ISSF requires an electronic target system to score shots to an accuracy of at least one-half of one decimal scoring ring. For the 300m rifle target the 9-ring is 5cm wide with required accuracy of 2.5cm. The TrueZeroTarget is with its 3mm accuracy 833% better than required!
Built-in shooting chronograph
The speed capture area returns bullet velocity at the target with 1% accuracy.
You’ll get shot location and velocity data for supersonic bullets at any distance. You can set your elevation turret with full confidence in a hunting situation.
True Point of Impact: True rifle zero
It’s a little know fact: The closed acoustic systems commonly used for competitive shooting display hits relative to the target center as determined by the sensors and not according to the actual target face.
As a consequence your gun’s zero is not the true zero you would obtain on a paper target. It may actually diverge by several centimeters.
This is of no consequence to a target shooter who scores hits relative to the screen representation of the target. For you as a responsible hunter on the other hand, you need the confidence of a true zero.
TrueZeroTarget’s acoustic LOMAH (Location Of Miss And Hit) technology displays true rifle zero and true target face position of hits.
LOMAH is the preferred technology for armed forces. TrueZeroTarget now offers this advanced technology to hunters in a very convenient and affordable package.
Any target face
Any target face can be printed on 5mm corrugated plastic and used with the built-in target holders.
Easy transition to e-target from paper
If the current bulky and infrastructure-demanding line-up electronic targets have been holding you back you now have no reason not to make the transition from paper to e-target.
Configurable for OEM solutions
The LOMAH system can be configured to almost any requirements for target size, communications, power, detecting windows, accuracy and rate of fire. The TrueZeroTargets customization options make it suitable for regular ranges or to be used with pop-up SIT or SAT, stationary infantry or armory targets. These targets may be used for infantry live-fire training or for air-to-ground fire.
The TrueZeroTarget is ITAR free and exportable to most countries of the world.
|Sensor type:||Ultrasonic transducers|
|Detection principle:||Acoustic supersonic shock wave and temperature compensation|
|Minimum bullet velocity:||440 m/s (Mach 1.3)|
|Calibre range:||4.3mm (.17) to 84mm|
|Accuracy:||+-3mm at center, +-9mm at extreme edge of detection area|
|Detection area:||600x600mm standard, scalable to 1000x1500mm|
|Max angle error from parallell trajectory:||1 degree horizontal and 3 degrees vertical|
|Target size:||As detection area or smaller|
|Target face:||Any, software configurable|
|Target face material:||Corrugated plastic or cardboard|
|Minimum time between shots:||100ms = 600 rounds per minute|
|Data transmission :||Wi-Fi IEEE 802.11 b/g|
|Wi-Fi Modes of operation:||As single stand alone unit AP mode and Infrastructure mode for existing networks or multiple unit setup|
|Acces mode:||IP address|
|Wi-Fi range:||Up to 300m with standard antennas depending on conditions, unlimited with access points and repeaters|
|Theft protection:||Isolation barrier using WPA2 encryption and Dual SSID AP setup (Infrastructure mode only)|
|Scoring software:||Windows operating system Win7 to Win10 compatible|
|Delay from shot to presentation:||Under optimal network conditions, less than 1 sec|
|Size:||700x120x106mm for 600x600mm model|
|Weight:||4.0kg for 600x600 model|
|Power:||Battery or 100-230VAC 50-60Hz using power adapter|
|Battery:||Built in LiFePO4 3.2V 12000mAh|
|Battery life:||Up to 16 hours continous operation, depending on temperature|
|Start up:||Less than 10 sec|
|Compliance:||CE, FCC class A|
|Operating temperature:||-30 to +70 °C|