Logg inn for å tjene Skytterpoeng for å dele!

A-Tec H2 (A-Lock Mini)


More efficient - Stronger design - Versatile

Merk at denne varen har opp til 7 dager leveringstid
Så lav som kr 3 900,00 kr 3 120,00

A-Tec H2 - More efficient - Stronger design - Versatile

The brand new H2 is Hertz version 2 and replaces all A-Tec Hertz models. In fact it is an upgraded modular Hertz with improved technology, stronger design and and it is very effective on the first round pop/cold barrel shot. The modular design provides the user the option to choose to take off one or two modules for a shorter and more compact design.

The new H2 silcerer is compatible with the A-LOCK mini. With A-LOCK mini you can attach or detach the silencer with a 60 degree twist. It´s done in less than a second. 


Overall performance 33 DB(C)
Silencer weight 410 grams
Diamtere 49.4 mm
Over barrel length 80 mm
Added length 150 mm
Total length 230 mm
Max barrel diametere Ø23.7 mm

Available calibers: 

.224 .264 (6,5) .30 .338 .375

Available threads (A-lock Mini): 

1/2"-20 UNF 1/2"-28 UNEF 5/8"-24 UNEF M13x1 M14x1
M14x1,5 M15x1 M16x1 M17x1 M18x1

A-Lock mini attachment instructions

A-lock mini adapter

If you have an A-LOCK Mini compatible silencer the A-LOCK Mini Adapter must be attached properly to your barrle prior to shooting. We recommend that this is done by a gunsmith with the correct tools.

1. Check that the rifle is unloaded and remove the bolt from the action.
2. Degrease the threads on the A-LOCK Mini Adapter and on the barrel.
3. Apply Loctite 638 to the threads on your barrel.
4. Attach and tighten the A-LOCK Mini Adapter to the barrel with the special tool.
5. Tighten with moderate force using the special tool. Not too hard, or the A-LOCK Mini threads may be damaged.
6. Wipe off excess adhesive.
7. Apply grease on the A-LOCK Mini Adapter.
8. Attach and detach the silencer a few times to check the fitting and alignment.

Warning: Tighten the silencer firmly by hand onto the A-LOCK Mini Adapter prior to shooting and check between shots that the silencer is firmly attached.

About A-Tec

A-TEC was founded in 1999 by Anders E. Johansen in Norway. With no more than a dedicated interest,  Anders started developing and producing improved silencers in his garage.

Anders noticed early on that the existing technology and construction were obsolete.  He achieved major improvements in performance, weight, construction and design – and the birth of a new silencer era was set.

From manufacturing silencers in his garage for hunters in Norway the sucessful company is now located in a top modern factory of 600 sqm. A-TEC provides professional management and employees who manufacture more than 20 000 silencers to a market ranging from the Northern Europe all the way to South-Africa.

Mer informasjon
Farge Black
Produsent A-Tec
Skriv din egen anmeldelse
Du anmelder:A-Tec H2 (A-Lock Mini)
Kopibeskyttet Vertebrae © 2017. Alle rettigheter reservert.