Vertebrae Blaser Bipod Mount - Versa-Pod


The Vertebrae Bipod Mount for Blaser is our way of solving multiple challenges; 

Ruggedness, flexibility, adaptability -  It will never bend or break, it enables you to switch between different bipod systems and we can adapt to to new systems as they arrrive on the market.

The adapter makes use of our proprietary interface, allowing the user to change between a Versa-Pod spigot, a Neo-Pod spigot and a short Picatinny rail.


The Vertebrae Bipod Mount for Blaser fits directly to a Blaser R93, R8 or Mauser M03 with synthetic stock and wood stocks where the front rifle sling mount is attached with a bolt and not a wood screw. It can be fitted to any other wood stock by using the Glue-in rod option.

The glue-in rod is a aluminium rod that can be epoxied into the stock, and the adapter mounted on the rod. The "step down interface" should rest lightly against the front of the stock when mounted. Use a drop of Loctite 222. The rod may also be used on Blaser synthetic stocks, if you need that extra bit of rigidity and strength. 

To mount the UBM on a Blaser, unscrew the original Blaser swivel mount and fasten the “step down-interface” using a 5mm Allen head screw. Make sure you have the interface aligned vertically. Use the Hexagon flange nut on the inside of the stock. Tighten the assembly together; we suggest using Locktite 222 on the screw. 

Changing the front part of the UBM from Versa-Pod to picatinny or to a NeoPod is done in seconds. Just unscrew the 6mm sunk head Allen bolt, replace the adapter and you’re done. We suggest using a drop of Loctite 222 and tightening the screw with the long end of the Allen key, using a two-finger torque grip. Do not overdo it. If you bend the Allen key you are over-torqueing it.

Write Your Own Review
You're reviewing:Vertebrae Blaser Bipod Mount - Versa-Pod
Kopibeskyttet Vertebrae © 2017. Alle rettigheter reservert.